评价矿井突水危险性的关键层方法

将煤层底板至含水层间承载能力最大的一层岩层看作起阻水作用的关键岩层（简称关键层），并把它简化为薄板，利用板的理论解确定该岩层的破断跨距，用以评价底板突水的危险性．实例分析表明，这种预测突水危险性的方法是简明有效的．     

一种求解层合圆柱壳的杂交应力单元

根据修正的余能原理，推导出一种求解复合材料层合圆柱壳的杂交应力单元。取用六面体等参单元，此单元反映了各层材料性质不同及应力分布沿整个厚度不连续现象，同时计入横向剪切变形和法向挤压变形，适用于厚层壳体。文章通过实例说明此单元能准确求出各层内的应力值，实用价值高。     

热/机械载荷下功能梯度材料矩形厚板的弯曲行为

采用Reddy高阶剪切板理论，考虑材料物性参数随坐标和温度变化的特性，研究在均匀变化的温度场内功能梯度材料矩形板在面内与横向载荷共同作用下的横向弯曲问题，基于一维DQ法和Galerkin技术，给出了一对边固支，另对边任意约束时板弯曲问题的半解析解，以Si3N4/SUS304板为例考察了材料组份，温度场，面内载荷及边界约束条件等对功能梯度材料板弯曲行为的影响。     

梁板结构埋入压电片的深度和厚度优化研究

根据梁的弯曲变形理论，以及压电材料的压电效应，对压电复合材料梁结构的应变和应力状态进行了分析。推导了压电材料埋入梁结构时其埋入深度和压电材料本身厚度的优化目标函数。根据优化目标函数，绘制出了在给定的基体材料和压电材料弹性模量比之下，压电材料的驱动力矩随埋入深度和压电材料厚度变化的三维曲面和等高线图，直观地表示出了埋入型压电材料智能结构获得最佳驱动力矩的配置方案。同时也分析了结构和压电材料两者的弹性模量之比对其结果的影响。结果表明，压电材料对于结构的作动力矩与其埋入基体材料的深度、本身厚度以及基体材料和压电材料的弹性模量之比都有着密切的联系。同时将结果也推广到了压电板结构，此时压电材料和基体材料的泊松比时其结果也有一定的影响。     

Integration of an Equilibrium System in an Enhanced Theory of Bending of Elastic Plates

The complete integral of the system of partial differential equations governing the equilibrium bending of elastic plates with transverse shear deformation and transverse normal strain is constructed by means of complex variable methods. The process helps to elucidate the physical meaning of certain analytic constraints imposed on the asymptotic behavior of the solutions and shows that in the case of an infinite plate, any analytic solution has finite energy if and only if the bending and twisting moments, the transverse shear force, the displacements in vertical planes, and two other characteristic quantities vanish at infinity. An example is discussed to illustrate the theory.     

Action of a Periodic Load on an Elastic Floating Plate

The problem of the behavior of an elastic floating plate in the form of a strip under the action of a periodic surface load is solved using the Wiener-Hopf technique. The shortwave approximation is found in explicit form. The effect of the frequency and nature of the acting load on the vibration amplitudes of the fluid and the plate is investigated numerically. It is found that for certain loads no waves propagate in the fluid and the vibrations of the plate are localized in the neighborhood of the acting load. Conditions under which local vibration can be realized are found.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, 2005, pp. 132–146.Original Russian Text Copyright © 2005 by Tkacheva.     

Two-dimensional problem of periodic loading of an elastic plate floating on the surface of an infinitely deep fluid

The action of external periodic pressure on an elastic plate floating on the surface of a fluid assumed to be ideal and incompressible is examined by the method of normal modes in the linear formulation. The behavior of the matrix of coefficients of the hydrodynamic load on the plate is considered in detail for different frequencies. The behavior of the plate under localized periodic loading is compared for the cases of a heavy fluid with a finite or infinite depth and for a weightless infinite-depth fluid. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 3, pp. 61–72, May–June, 2005.     

压电智能板结构的H∞振动控制

研究了压电智能板结构的H∞振动控制问题。先采用4节点矩形弯曲薄板单元(含12个位移自由度,2个电自由度)的有限元模型,利用Ham ilton原理得到了智能板结构的运动微分方程,然后综合运用模态截断法、最小实现法和平衡降阶法,对压电智能板结构的系统状态方程进行了降阶处理,得到了可观可控且低阶的近似状态方程,针对该降阶后的系统,利用H∞控制理论求解出能抑制干扰的动态输出反馈控制器,并将该控制器作用到降阶处理前的原系统中,从而能实现原系统抗干扰的振动控制。最后,以智能悬臂薄板结构为例,讨论了降阶过程中出现的一些问题和结论,并求出了相应的动态输出反馈控制器。仿真结果表明,文中的方法可实现压电智能板结构对干扰的抑制。     

Homotopy Solutions for a Generalized Second-Grade Fluid Past a Porous Plate

The flow of a second-grade fluid past a porous plate subject to either suction or blowing at the plate has been studied. A modified model of second-grade fluid that has shear-dependent viscosity and can predict the normal stress difference is used. The differential equations governing the flow are solved using homotopy analysis method (HAM). Expressions for the velocity have been constructed and discussed with the help of graphs. Analysis of the obtained results showed that the flow is appreciably influenced by the material and normal stress coefficient. Several results of interest are deduced as the particular cases of the presented analysis.     

圆板动力反直观行为实验研究

对受子弹正向撞击的铝合金圆板进行了动力反直观行为的实验研究。描述了不同撞击速度下板的响应模式,发现了圆板中的反直观现象,即板的最终变形与子弹撞击方向相反,并记录了板在整个变形过程中典型点的位移历史曲线,进一步证实了结构动力响应的反直观行为是一种客观存在的弹塑性动力行为。